WINDOWS SOFTWARE

Waveform Generator WFG500 and WFG600

Please feel free to download and try the most recent version of the Waveform Generator software. Imagine that whatever waveforms you are able to create on the computer screen may be output in a real time from the Waveform Generator.

Disclaimer:

• This is a full version of the software (not a demo). It is normally shipped together with the instrument.
• The software is provided for your evaluation only. You may not sell it, but you may give it free for evaluation by your colleagues.
• The software is provided on the "as is" basis and FLC Electronics AB disclaims any responsability of any possible damage the software might cause in any way.

Download WFG600 manual in Adobe Acrobat format.

We appreciate your comments! (email us)

---

 Revision 3.13

For Windows NT/2000/ME/XP/Vista

posted January 22, 2008

Bookmark this site - program updates are posted here !

If you want to be notified by email - just request it!

Application	wgxp_exe_3.13.zip
Help folder	Help.zip
Manual (included in Help folder)	WFG500_manual.pdf
Manual (new WFG600 model)	WFG600.pdf

To install please put the waveform_generator.exe application together with unzipped "Help" folder in any chosen directory on your hard disk.

The application searches for help and manual files in the same directory it resides. If not successful, it then tries to reach these files on FLC Electronics server.

Please select the model of your waveform generator, output voltage and communication port from the startup screen when running the software for the first time. The setup dialog can also be accessed from File > Preferences... menu.

Previous updates of version 3:

Rev. 3.3

Rev. 3.2

Rev 3.1

Rev 3.0

---

Revision 2.21

Last revision of version 2 software:

2.21 software

Rev 2.x menu help in HTML format

Note for WFG500 users:

WFG500 is no longer produced. Existing WFG500 units can be updated to WFG600. Please contact FLC Electronics AB or a representative in your country.

Note for WFG400 users:

• Please use File->Preferences to set the communication port and speed (19200 baud for the WFG400 and 57600baud for the WFG500/WFG600);
• Please note that starting from rev 2.6 the software uses data compression in communication, which is not supported by the WFG400. Use menu File->Preferences to choose your WFG model.

WFG400 is no longer produced. Existing WFG400 units can be updated to WFG600. Please contact FLC Electronics AB or a representative in your country.

Page updated April 09, 2008