MACINTOSH SOFTWARE

Waveform Generator

WFG400, WFG500 and WFG600

Please feel free to download and try the most recent version of the Waveform Generator software. Imagine that whatever waveforms you are able to create on the computer screen may be output in a real time from the Waveform Generator.

This software has been developed in-house by FLC Electronics AB

Disclaimer:

• This is a full version of the software (not a demo). It is normally shipped together with the instrument.
• The software is provided for your evaluation only. You may not sell it, but you may give it free for evaluation by your colleagues.
• The software is provided on the "as is" basis and FLC Electronics AB disclaims any responsability of any possible damage the software might cause in any way.

Download WFG600 manual in Adobe Acrobat format.

Instructions are also available as a balloon help on Macintosh and as HTML menu help.

We appreciate your comments! (email us)

Development of WFG500 Macintosh software has been discontinued. It requires a Macintosh model with a serial port and System 7, 8 or 9.  

WFG500 and WFG600

WFG500 is no longer produced. Existing WFG500 units can be updated to WFG600. Please contact FLC Electronics AB or a representative in your country.

WFG400

The last release version for WFG400 waveform generator.

WFG400 is no longer produced. Existing WFG400 units can be updated to WFG600. Please contact FLC Electronics AB or a representative in your country.

WaveformGenerator rev 4.5 .sea

(160k, self-extracting archive)

Version 5 of the software recompiled for the use with WFG400. Some funtions, like matrix driving, multiple burst, programmable scripts, etc., will not be understood by the WFG400 controller which will respond with an error LED.

WfGen 5.1.12 wfg400 PP.sit

(164k)

Page updated October 12, 2006